Difference between revisions of "POP Kiosk Cover (part)"

From CLIO

(Created page with "==Overview== The cover provides protection to the front of the kiosk display by attaching directly to the collar or POP Kiosk Bumper (part)|bumpe...")
 
Line 22: Line 22:
|A protective touchscreen cover
|A protective touchscreen cover
|1
|1
|22 hours 12 minute
|6 hours 26 minutes
|49g
|42g
|
|
|}
|}
Line 59: Line 59:
|-
|-
|Infill - Density
|Infill - Density
|50%
|10%
|This part is a hollow shell and does not have many gaps between the walls that require infill.  Nevertheless, this is set higher than normal to improve impact resistance at the curved corners.
|This part does not apply much as the cover is thin and does not need infill.
|-
|-
|Infill - Pattern
|Infill - Pattern
|Tri-Hexagon
|Tri-Hexagon
Cubic Subdivision
|These infill patterns provide good internal support in multiple directions.  Tri-Hexagon uses less filament but is also less durable.
|These infill patterns provide good internal support in multiple directions.  Tri-Hexagon uses less filament but is also less durable.
|-
|-
|Speed - Print Speed
|Speed - Print Speed
|40mm/s
|40mm/s
|For final production prints, we recommend printing slower than average to decrease stringing with small holes.
|For final production prints, we recommend printing slower than average to improve print quality with the thin walls.
|-
|-
|Support - Generate Support
|Support - Generate Support
|Yes
|No
|This part has a lot of overhangs that require the use of supports.
|This part has no overhangs.
|-
|Support - Support Structure
|Tree
|We highly recommend tree supports instead of normal supports.  They take more time, but they require less filament and are much easier to remove from inside the case.
|-
|Support - Support Placement
|Touching Buildplate
|Only printing supports that touch the build plate are much easier to remove from this print.
|-
|-
|Build Plate Adhesion - Adhesion Type
|Build Plate Adhesion - Adhesion Type
|Skirt
|None
|This part has a lot of contact with the print bed and should not require a raft.
|This part has a lot of contact with the print bed and should not require a raft.
|-
|Experimental - Small Hole Max Size
|30mm
|This will cause the printer to print slower when it is printing the nut and bolt holes on the back of the case.
|}
|}
==Results==
==Results==
Line 101: Line 88:
|Creality
|Creality
|CR-10 Mini
|CR-10 Mini
|Decent print quality.  The Bowden extruder on the CR-10 series struggles with most flexible filaments, but it is possible.
|Excellent print quality.  Reliable machine.
|-
|-
|Creality
|Creality
|CR-10
|CR-10
|Decent print quality.  The Bowden extruder on the CR-10 series struggles with most flexible filaments, but it is possible.
|Excellent print quality.  Reliable machine.
|-
|-
|Creality
|Creality
|Ender 3 S-1 Pro
|Ender 3 S-1 Pro
|Excellent print quality. The all-metal direct drive extruder printed TPU and TPE like they were standard rigid filaments.
|Excellent print quality. Reliable machine.
|}
|}
===Build Surface===
===Build Surface===
Line 127: Line 114:
|-
|-
|Polyetherimide (PEI) build plate
|Polyetherimide (PEI) build plate
|This part may require a raft if there are issues with the first layer staying adhered.
|There were no issues with print plate adhesion.
|}
|}
===Filament===
===Filament===
Line 136: Line 123:
!Notes
!Notes
|-
|-
|[https://www.priline3d.com/pd.jsp?id=35 Priline TPU]
|[https://overture3d.com/products/overturepla Overture PLA]
|Priline
|Overture
|Excellent print quality when used with a direct drive printer like the Creality S-1 Pro.
|Excellent build quality and durability.  Good for prototyping or production kiosks.
|-
|-
|Ninjatek NinjaFlex TPU
|[https://www.amazon.com/dp/B07T2R1BQJ Amazon Basics PLA]
|Ninjatek
|Amazon
|Excellent print quality when used with a direct drive printer like the Creality S-1 Pro.
|Decent build quality and durability.  Recommended for rapid prototyping.
|}
|}
==References==
==References==
<references />
<references />

Revision as of 10:31, 28 April 2022

Overview

The cover provides protection to the front of the kiosk display by attaching directly to the collar or bumper.  This cover was created to provide protection to the glass screen during transport and storage.

Features

  • Provides protection to the touchscreen display during transport
  • Rounded and tapered corners designed to reduce accidental snags
  • Optional foam pad adds extra impact protection

Specifications

Dimensions

This kiosk bumper is 213.45mm x 127.56mm x 13.00mm.

Printed Parts

Part Description Quantity Estimates Example
Print Time Filament Usage
Cover A protective touchscreen cover 1 6 hours 26 minutes 42g

Hardware

This part requires no additional hardware.

Material

This part is printed with polylactic acid (PLA) or other sturdy plastic, such as Polypropylene (PP) or Acrylonitrile styrene acrylate (ASA).

Printing This Part

Slicing

Orientation

Part Notes Example
Cover We recommend printing the cover with the front in contact with the build plate.

Settings

Cover

We start with the default "Standard Quality" 0.2 mm print profile. We recommend the following settings overrides:

Setting Recommendation Notes
Shell - Wall Line Count 3 This will print all of the walls as solid.
Shell - Bottom Layers 5 This will print the entire protective front as a solid piece of plastic without infill.
Infill - Density 10% This part does not apply much as the cover is thin and does not need infill.
Infill - Pattern Tri-Hexagon These infill patterns provide good internal support in multiple directions.  Tri-Hexagon uses less filament but is also less durable.
Speed - Print Speed 40mm/s For final production prints, we recommend printing slower than average to improve print quality with the thin walls.
Support - Generate Support No This part has no overhangs.
Build Plate Adhesion - Adhesion Type None This part has a lot of contact with the print bed and should not require a raft.

Results

Printers

This part has been print tested with the following 3D printers:

Manufacturer Model Notes
Creality CR-10 Mini Excellent print quality. Reliable machine.
Creality CR-10 Excellent print quality. Reliable machine.
Creality Ender 3 S-1 Pro Excellent print quality. Reliable machine.

Build Surface

This part has been print tested with the following build surfaces:

Method Notes
Painter's tape
Glue stick Creates an uneven and non-uniform first print layer appearance.
Adhesive build surface First layer may have problems printing full height depending on type and hardness of build surface, but this does not affect the overall printability.
Polyetherimide (PEI) build plate There were no issues with print plate adhesion.

Filament

This part has been print tested with the following materials:

Filament Manufacturer Notes
Overture PLA Overture Excellent build quality and durability. Good for prototyping or production kiosks.
Amazon Basics PLA Amazon Decent build quality and durability. Recommended for rapid prototyping.

References

Retrieved from "https://wiki.interpretive.tech/index.php?title=POP_Kiosk_Cover_(part)&oldid=1176"