POP Kiosk Cover (part)

This section requires photographs, illustrations or screenshots.

Overview

The cover provides protection to the front of the kiosk display by attaching directly to the collar or bumper.  This cover was created to provide protection to the glass screen during transport and storage.

Features

• Provides protection to the touchscreen display during transport
• Rounded and tapered corners designed to reduce accidental snags
• Optional foam pad adds extra impact protection

Specifications

Dimensions

This kiosk bumper is 213.45mm x 127.56mm x 13.00mm.

Printed Parts

Part	Description	Quantity	Estimates		Example
			Print Time	Filament Usage
Cover	A protective touchscreen cover	1	6 hours 26 minutes	42g

Hardware

This part requires no additional hardware.

Material

This part is printed with polylactic acid (PLA) or other sturdy plastic, such as Polypropylene (PP) or Acrylonitrile styrene acrylate (ASA).

Printing This Part

Slicing

Orientation

Part	Notes	Example
Cover	We recommend printing the cover with the front in contact with the build plate.

Settings

Cover

We start with the default "Standard Quality" 0.2 mm print profile. We recommend the following settings overrides:

Setting	Recommendation	Notes
Shell - Wall Line Count	3	This will print all of the walls as solid.
Shell - Bottom Layers	5	This will print the entire protective front as a solid piece of plastic without infill.
Infill - Density	10%	This part does not apply much as the cover is thin and does not need infill.
Infill - Pattern	Tri-Hexagon	These infill patterns provide good internal support in multiple directions.  Tri-Hexagon uses less filament but is also less durable.
Speed - Print Speed	40mm/s	For final production prints, we recommend printing slower than average to improve print quality with the thin walls.
Support - Generate Support	No	This part has no overhangs.
Build Plate Adhesion - Adhesion Type	None	This part has a lot of contact with the print bed and should not require a raft.

Results

Printers

This part has been print tested with the following 3D printers:

Manufacturer	Model	Notes
Creality	CR-10 Mini	Excellent print quality. Reliable machine.
Creality	CR-10	Excellent print quality. Reliable machine.
Creality	Ender 3 S-1 Pro	Excellent print quality. Reliable machine.

Build Surface

This part has been print tested with the following build surfaces:

Method	Notes
Painter's tape
Glue stick	Creates an uneven and non-uniform first print layer appearance.
Adhesive build surface	First layer may have problems printing full height depending on type and hardness of build surface, but this does not affect the overall printability.
Polyetherimide (PEI) build plate	There were no issues with print plate adhesion.

Filament

This part has been print tested with the following materials:

Filament	Manufacturer	Notes
Overture PLA	Overture	Excellent build quality and durability. Good for prototyping or production kiosks.
Amazon Basics PLA	Amazon	Decent build quality and durability. Recommended for rapid prototyping.