Difference between revisions of "BurkeMobile Pilot Testing"

From CLIO

CLIO>Clio
 
 
(One intermediate revision by the same user not shown)
Line 2: Line 2:


==Kiosk==
==Kiosk==
{{Main|BurkeMobile (kiosk)}}
The kiosk prototype used during CLIO pilot testing was constructed using off-the-shelf open-source hardware. It is powered by the Raspberry Pi 3B+ computer and official Raspberry Pi 7" touchscreen. The case was fabricated using consumer 3D printer. Our prototype kiosk uses a Linux-distribution known as DietPi and open-source software.  The total per-unit build cost per kiosk is $125.
The kiosk prototype used during CLIO pilot testing was constructed using off-the-shelf open-source hardware. It is powered by the Raspberry Pi 3B+ computer and official Raspberry Pi 7" touchscreen. The case was fabricated using consumer 3D printer. Our prototype kiosk uses a Linux-distribution known as DietPi and open-source software.  The total per-unit build cost per kiosk is $125.
{{Stub}}
{{Stub}}

Latest revision as of 22:27, 9 May 2022

Imbox style.png

Kiosk

The kiosk prototype used during CLIO pilot testing was constructed using off-the-shelf open-source hardware. It is powered by the Raspberry Pi 3B+ computer and official Raspberry Pi 7" touchscreen. The case was fabricated using consumer 3D printer. Our prototype kiosk uses a Linux-distribution known as DietPi and open-source software. The total per-unit build cost per kiosk is $125.

Imbox style.png

Activities

Imbox style.png

Evaluation

Label important.png
Imbox style.png

Volunteers

Imbox style.png

Education Staff

Imbox style.png