Difference between revisions of "POP Kiosk Foot (part)"
(4 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
{{DocumentationPage | {{DocumentationPage}} | ||
==Overview== | ==Overview== | ||
<gallery> | <gallery> | ||
Line 6: | Line 6: | ||
File:POP Kiosk Disassembled.png|alt=Kiosk Disassembled | File:POP Kiosk Disassembled.png|alt=Kiosk Disassembled | ||
</gallery>The foot is used to display the kiosk on a flat surface, such as a table or shelf. It is printed in two parts then attached together with an M4 bolt and optional glue. The foot can be used with a two- or three-prong adapter. The foot can be used with suction cups to more securely attach to sheer surfaces, such as glass or polished stone. Additionally, 3D printed TPU or third-party anti-slip grips can be attached to the bottom. | </gallery>The foot is used to display the kiosk on a flat surface, such as a table or shelf. It is printed in two parts then attached together with an M4 bolt and optional glue. The foot can be used with a two- or three-prong adapter. The foot can be used with suction cups to more securely attach to sheer surfaces, such as glass or polished stone. Additionally, 3D printed TPU or third-party anti-slip grips can be attached to the bottom. | ||
==Features== | |||
== Features== | |||
* Prints in two parts to improve long term durability | * Prints in two parts to improve long term durability | ||
* Can be used to attach two-prong ("male") or three-prong ("female") Modular Mounting System accessories. | * Can be used to attach two-prong ("male") or three-prong ("female") Modular Mounting System accessories. | ||
* Can be used with M5 screw-on suction cups or 3D printed TPU anti-slip grips | * Can be used with M5 screw-on suction cups or 3D printed TPU anti-slip grips | ||
== Download == | |||
The most up-to-date version of this part can be downloaded from our Thingiverse page.{{ExternalResource|[https://www.thingiverse.com/thing:5447980 POP Foot – Thingiverse]}} | |||
==Specifications== | ==Specifications== | ||
===Dimensions=== | ===Dimensions=== | ||
Line 19: | Line 24: | ||
! rowspan="2" |Quantity | ! rowspan="2" |Quantity | ||
! colspan="2" |Estimates | ! colspan="2" |Estimates | ||
|- | |- | ||
!Print Time | !Print Time | ||
Line 29: | Line 33: | ||
|7 hours 26 minutes | |7 hours 26 minutes | ||
|63g | |63g | ||
|- | |- | ||
|Modular Mount Head – Two-Prong | |Modular Mount Head – Two-Prong | ||
Line 36: | Line 39: | ||
|54 minutes | |54 minutes | ||
|6g | |6g | ||
|- | |- | ||
|Modular Mount Head – Three-Prong | |Modular Mount Head – Three-Prong | ||
Line 42: | Line 44: | ||
|1 hours 3 minutes | |1 hours 3 minutes | ||
|7g | |7g | ||
|} | |} | ||
===Hardware=== | ===Hardware=== | ||
Line 59: | Line 60: | ||
|} | |} | ||
===Material=== | ===Material=== | ||
This part is printed with polylactic acid (PLA) or other sturdy plastic, such as | This part is printed with polylactic acid (PLA) or other sturdy plastic, such as Polycarbonate (PC) or Acrylonitrile styrene acrylate (ASA). | ||
==Printing This Part== | ==Printing This Part== | ||
===Slicing=== | ===Slicing=== | ||
Line 70: | Line 71: | ||
|Kiosk Foot | |Kiosk Foot | ||
|We recommend printing this part with the bottom of the foot touching the build plate. | |We recommend printing this part with the bottom of the foot touching the build plate. | ||
| | |[[File:Foot Printing Orientation.png|alt=Foot Printing Orientation|100x100px]] | ||
|- | |- | ||
|Modular Mount Head – Two-Prong | |Modular Mount Head – Two-Prong | ||
|We recommend printing this part with the prongs parallel to the build plate. | |We recommend printing this part with the prongs parallel to the build plate. | ||
| | |[[File:Two Prong Printing Orientation.png|alt=Two Prong Printing Orientation|100x100px]] | ||
|- | |- | ||
|Modular Mount Head – Three-Prong | |Modular Mount Head – Three-Prong | ||
|We recommend printing this part with the prongs parallel to the build plate and the rounded edge pointed up. | |We recommend printing this part with the prongs parallel to the build plate and the rounded edge pointed up. | ||
| | |[[File:Three Prong Printing Orientation.png|alt=Three Prong Printing Orientation|100x100px]] | ||
|} | |} | ||
====Settings==== | ====Settings==== |
Latest revision as of 14:24, 16 March 2023
Overview
The foot is used to display the kiosk on a flat surface, such as a table or shelf. It is printed in two parts then attached together with an M4 bolt and optional glue. The foot can be used with a two- or three-prong adapter. The foot can be used with suction cups to more securely attach to sheer surfaces, such as glass or polished stone. Additionally, 3D printed TPU or third-party anti-slip grips can be attached to the bottom.
Features
- Prints in two parts to improve long term durability
- Can be used to attach two-prong ("male") or three-prong ("female") Modular Mounting System accessories.
- Can be used with M5 screw-on suction cups or 3D printed TPU anti-slip grips
Download
The most up-to-date version of this part can be downloaded from our Thingiverse page.
Specifications
Dimensions
The kiosk foot measures 189.22mm x 164.92mm x 21.74mm.
Printed Parts
Part | Description | Quantity | Estimates | |
---|---|---|---|---|
Print Time | Filament Usage | |||
Kiosk Foot | Provides a stable base on flat surfaces | 1 | 7 hours 26 minutes | 63g |
Modular Mount Head – Two-Prong | Head for the mount plate that can be used to attach two-prong ("male") accessories. | 1 | 54 minutes | 6g |
Modular Mount Head – Three-Prong | Head for the mount plate that can be used to attach three-prong ("female") accessories. | 1 hours 3 minutes | 7g |
Hardware
Part | Description | Quantity |
---|---|---|
M4-10mm machine screw | Attaches the kiosk foot to the modular mount head | 1 |
M5-5mm suction cups | Suction cups can provide additional stability on sheer surfaces. | 3 |
Material
This part is printed with polylactic acid (PLA) or other sturdy plastic, such as Polycarbonate (PC) or Acrylonitrile styrene acrylate (ASA).
Printing This Part
Slicing
Orientation
Settings
Kiosk Foot
We start with the default "Standard Quality" 0.2 mm print profile. We recommend the following settings overrides:
Setting | Recommendation | Notes |
---|---|---|
Shell - Wall Line Count | 4 | This was increased from the default to increase the durability when higher amounts of stress are applied. |
Shell - Bottom Layers | 4 | This will provide sturdy walls for each prong. |
Shell - Top Layers | 4 | This will provide sturdy walls for each prong. |
Infill - Density | 45 | This part supports the kiosk and the extra infill weight helps with providing a sturdy base. |
Infill - Pattern | Tri-Hexagon
Cubic Subdivision |
These infill patterns provide good internal support in multiple directions. Tri-Hexagon uses less filament but is also less durable. |
Speed - Print Speed | 40mm/s | For final production prints, we recommend printing slower than average to decrease stringing with small holes. |
Support - Generate Support | No | This part has no overhangs. |
Build Plate Adhesion - Adhesion Type | None | This part has a lot of contact with the print bed and should not require a raft. |
Modular Mount Head – Two-Prong
We start with the default "Standard Quality" 0.2 mm print profile. We recommend the following settings overrides:
Setting | Recommendation | Notes |
---|---|---|
Shell - Wall Line Count | 4 | This was increased from the default to increase the durability when higher amounts of stress are applied. |
Shell - Bottom Layers | 4 | This will provide sturdy walls for each prong. |
Shell - Top Layers | 4 | This will provide sturdy walls for each prong. |
Infill - Density | 45 | This part can be subject to high stress and more infill will provide greater structural integrity. |
Infill - Pattern | Tri-Hexagon
Cubic Subdivision |
These infill patterns provide good internal support in multiple directions. Tri-Hexagon uses less filament but is also less durable. |
Speed - Print Speed | 40mm/s | For final production prints, we recommend printing slower than average to decrease stringing with small holes. |
Support - Generate Support | Yes | This part has a lot of overhangs that require the use of supports. |
Support - Support Structure | Tree | We highly recommend tree supports instead of normal supports. They take more time, but they require less filament and are much easier to remove. |
Support - Support Placement | Touching Buildplate | Only printing supports that touch the build plate are much easier to remove from this print. |
Build Plate Adhesion - Adhesion Type | Raft | This part is small and uses a lot of supports, so it is recommended to use a raft. |
Modular Mount Head – Three-Prong
We start with the default "Standard Quality" 0.2 mm print profile. We recommend the following settings overrides:
Setting | Recommendation | Notes |
---|---|---|
Shell - Wall Line Count | 4 | This was increased from the default to increase the durability when higher amounts of stress are applied. |
Shell - Bottom Layers | 4 | This will provide sturdy walls for each prong. |
Shell - Top Layers | 4 | This will provide sturdy walls for each prong. |
Infill - Density | 45 | This part can be subject to high stress and more infill will provide greater structural integrity. |
Infill - Pattern | Tri-Hexagon
Cubic Subdivision |
These infill patterns provide good internal support in multiple directions. Tri-Hexagon uses less filament but is also less durable. |
Speed - Print Speed | 40mm/s | For final production prints, we recommend printing slower than average to decrease stringing with small holes. |
Support - Generate Support | Yes | This part has a lot of overhangs that require the use of supports. |
Support - Support Structure | Tree | We highly recommend tree supports instead of normal supports. They take more time, but they require less filament and are much easier to remove. |
Support - Support Placement | Touching Buildplate | Only printing supports that touch the build plate are much easier to remove from this print. |
Build Plate Adhesion - Adhesion Type | Raft | This part is small and uses a lot of supports, so it is recommended to use a raft. |
Results
Printers
This part has been print tested with the following 3D printers:
Manufacturer | Model | Notes |
---|---|---|
Creality | CR-10 Mini | Excellent print quality. Reliable machine. |
Creality | CR-10 | Excellent print quality. Reliable machine. |
Creality | Ender 3 S-1 Pro |
Build Surface
This part has been print tested with the following build surfaces:
Method | Notes |
---|---|
Painter's tape | |
Glue stick | Creates an uneven and non-uniform first print layer appearance. |
Adhesive build surface | First layer may have problems printing full height depending on type and hardness of build surface, but this does not affect the overall printability. |
Polyetherimide (PEI) build plate | Some parts may require a raft if there are issues with the first layer adhering. |
Filament
This part has been print tested with the following materials:
Filament | Manufacturer | Notes |
---|---|---|
Overture PLA | Overture | Excellent build quality and durability. Good for prototyping or production kiosks. |
Amazon Basics PLA | Amazon | Decent build quality and durability. Recommended for rapid prototyping. |
Documentation | |
---|---|
Installation | Look and Feel |
Interaction Modes | Developing Activity Types |
Creating an Interactive | Framework |
Integrating CLIO | Contribute |