Difference between revisions of "POP Kiosk Thumbscrew (part)"

Latest revision as of 15:25, 16 March 2023

This section contains CLIO documentation.

Overview

The thumbscrews are used with standard M5 bolts to make it easier to tighten and loosen accessories.

Features

Large size for easier turning

Download

The most up-to-date version of this part can be downloaded from our Thingiverse page.

Resource: POP Thumbscrew – Thingiverse

Specifications

Dimensions

The thumbscrew measures 25.19mm x 25.19mm x 9.89mm.

Printed Parts

Part	Description	Quantity	Estimates
Part	Description	Quantity	Print Time	Filament Usage
Thumbscrew	Can be used with M5 bolts to provide easier hand tensioning.	Varies	40 minutes	5g

Hardware

Manufacturer	Item	Description	Avg MSRP Unit Cost	Qty.	Avg Total Cost
Fastener Warehouse	M5-10mm machine screw	This length is required when using the thumbscrews to attach the Modular Mount Adapter to the kiosk case.	$0.22	1	$0.22
Fastener Warehouse	M5-20mm machine screw	This length is required when using the thumbscrews with Modular Mounting System accessories.	$0.22	1	$0.22

Material

This part is printed with polylactic acid (PLA) or other sturdy plastic, such as Polycarbonate (PC) or Acrylonitrile styrene acrylate (ASA).

Printing This Part

Slicing

Orientation

Part	Notes	Example
Thumbscrew	We recommend printing the thumbscrew with the narrower end of the hole touching the buildplate.

Settings

Thumbscrew

We start with the default "Standard Quality" 0.2 mm print profile. We recommend the following settings overrides:

Setting	Recommendation	Notes
Shell - Wall Line Count	4	This was increased from the default to increase the durability when higher amounts of stress are applied.
Shell - Bottom Layers	4	This will provide sturdy walls for each prong.
Shell - Top Layers	4	This will provide sturdy walls for each prong.
Infill - Density	45	This will provide enough stability for a small thumbscrew under repeated use.
Infill - Pattern	Tri-Hexagon Cubic Subdivision	These infill patterns provide good internal support in multiple directions. Tri-Hexagon uses less filament but is also less durable.
Speed - Print Speed	40mm/s	For final production prints, we recommend printing slower than average to decrease stringing with small holes.
Support - Generate Support	No	This part has no overhangs.
Build Plate Adhesion - Adhesion Type	Raft	This part is small and it is recommended to use a raft.

Results

Printers

This part has been print tested with the following 3D printers:

Manufacturer	Model	Notes
Creality	CR-10 Mini	Excellent print quality. Reliable machine.
Creality	CR-10	Excellent print quality. Reliable machine.
Creality	Ender 3 S-1 Pro

Build Surface

This part has been print tested with the following build surfaces:

Method	Notes
Painter's tape
Glue stick	Creates an uneven and non-uniform first print layer appearance.
Adhesive build surface	First layer may have problems printing full height depending on type and hardness of build surface, but this does not affect the overall printability.
Polyetherimide (PEI) build plate	Some parts may require a raft if there are issues with the first layer adhering.

Filament

This part has been print tested with the following materials:

Filament	Manufacturer	Notes
Overture PLA	Overture	Excellent build quality and durability. Good for prototyping or production kiosks.
Amazon Basics PLA	Amazon	Decent build quality and durability. Recommended for rapid prototyping.

Documentation
Installation	Look and Feel
Interaction Modes	Developing Activity Types
Creating an Interactive	Framework
Integrating CLIO	Contribute

@@ Line 1: / Line 1: @@
-{{NeedsDemonstration}}
+{{DocumentationPage}}
 ==Overview==
-The thumbscrews are used with standard M5 bolts to make it easier to tighten and loosen accessories.
+<gallery>
+File:Featured preview Thumbscrew.jpg|alt=Thumbscrew
+</gallery>The thumbscrews are used with standard M5 bolts to make it easier to tighten and loosen accessories.
 ==Features==
 *Large size for easier turning
+== Download ==
+The most up-to-date version of this part can be downloaded from our Thingiverse page.{{ExternalResource|[https://www.thingiverse.com/thing:5447995 POP Thumbscrew – Thingiverse]}}
 ==Specifications==
 ===Dimensions===
@@ Line 13: / Line 19: @@
 ! rowspan="2" |Quantity
 ! colspan="2" |Estimates
-! rowspan="2" |Example
 |-
 !Print Time
@@ Line 23: / Line 28: @@
 |40 minutes
 |5g
-|
 |}
 ===Hardware===
 {| class="wikitable"
-!Part
+!Manufacturer
+!Item
 !Description
-!Quantity
+!Avg MSRP Unit Cost
+!Qty.
+!Avg Total Cost
 |-
-|M5-10mm machine screw
+| rowspan="2" |Fastener Warehouse
-|This length is required when using the thumbscrews with the kiosk case mounts.
+|[https://www.fastener-warehouse.com/Socket-Head-Cap-Screw-A2-Stainless-Steel-p/27312510.htm M5-10mm machine screw]
-| rowspan="2" |1
+|This length is required when using the thumbscrews to attach the Modular Mount Adapter to the kiosk case.
+|$0.22
+|1
+|$0.22
 |-
-|M5-20mm machine screw
+|[https://www.fastener-warehouse.com/Socket-Head-Cap-Screw-A2-Stainless-Steel-p/27312520.htm M5-20mm machine screw]
 |This length is required when using the thumbscrews with [https://www.thingiverse.com/thing:2194278 Modular Mounting System] accessories.
+|$0.22
+|1
+|$0.22
 |}
 ===Material===
-This part is printed with polylactic acid (PLA) or other sturdy plastic, such as Polypropylene (PP) or Acrylonitrile styrene acrylate (ASA).
+This part is printed with polylactic acid (PLA) or other sturdy plastic, such as Polycarbonate (PC) or Acrylonitrile styrene acrylate (ASA).
 ==Printing This Part==
 ===Slicing===
@@ Line 50: / Line 63: @@
 |Thumbscrew
 |We recommend printing the thumbscrew with the narrower end of the hole touching the buildplate.
-|
+|[[File:Thumbscrew Printing Orientation.png|alt=Thumbscrew Printing Orientation|100x100px]]
 |}
 ====Settings====
@@ Line 146: / Line 159: @@
 |Decent build quality and durability.  Recommended for rapid prototyping.
 |}
+{{DocumentationNavigation}}