Difference between revisions of "POP Kiosk Thumbscrew (part)"
From CLIO
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{DocumentationPage | {{DocumentationPage}} | ||
==Overview== | ==Overview== | ||
<gallery> | <gallery> | ||
| Line 6: | Line 6: | ||
==Features== | ==Features== | ||
*Large size for easier turning | *Large size for easier turning | ||
== Download == | |||
The most up-to-date version of this part can be downloaded from our Thingiverse page.{{ExternalResource|[https://www.thingiverse.com/thing:5447995 POP Thumbscrew – Thingiverse]}} | |||
==Specifications== | ==Specifications== | ||
===Dimensions=== | ===Dimensions=== | ||
| Line 15: | Line 19: | ||
! rowspan="2" |Quantity | ! rowspan="2" |Quantity | ||
! colspan="2" |Estimates | ! colspan="2" |Estimates | ||
|- | |- | ||
!Print Time | !Print Time | ||
| Line 25: | Line 28: | ||
|40 minutes | |40 minutes | ||
|5g | |5g | ||
|} | |} | ||
===Hardware=== | ===Hardware=== | ||
| Line 50: | Line 52: | ||
|} | |} | ||
===Material=== | ===Material=== | ||
This part is printed with polylactic acid (PLA) or other sturdy plastic, such as | This part is printed with polylactic acid (PLA) or other sturdy plastic, such as Polycarbonate (PC) or Acrylonitrile styrene acrylate (ASA). | ||
==Printing This Part== | ==Printing This Part== | ||
===Slicing=== | ===Slicing=== | ||
| Line 61: | Line 63: | ||
|Thumbscrew | |Thumbscrew | ||
|We recommend printing the thumbscrew with the narrower end of the hole touching the buildplate. | |We recommend printing the thumbscrew with the narrower end of the hole touching the buildplate. | ||
| | |[[File:Thumbscrew Printing Orientation.png|alt=Thumbscrew Printing Orientation|100x100px]] | ||
|} | |} | ||
====Settings==== | ====Settings==== | ||
Latest revision as of 14:25, 16 March 2023
This section contains CLIO documentation.
Overview
The thumbscrews are used with standard M5 bolts to make it easier to tighten and loosen accessories.
Features
- Large size for easier turning
Download
The most up-to-date version of this part can be downloaded from our Thingiverse page.
Resource: POP Thumbscrew – Thingiverse
Specifications
Dimensions
The thumbscrew measures 25.19mm x 25.19mm x 9.89mm.
Printed Parts
| Part | Description | Quantity | Estimates | |
|---|---|---|---|---|
| Print Time | Filament Usage | |||
| Thumbscrew | Can be used with M5 bolts to provide easier hand tensioning. | Varies | 40 minutes | 5g |
Hardware
| Manufacturer | Item | Description | Avg MSRP Unit Cost | Qty. | Avg Total Cost |
|---|---|---|---|---|---|
| Fastener Warehouse | M5-10mm machine screw | This length is required when using the thumbscrews to attach the Modular Mount Adapter to the kiosk case. | $0.22 | 1 | $0.22 |
| M5-20mm machine screw | This length is required when using the thumbscrews with Modular Mounting System accessories. | $0.22 | 1 | $0.22 |
Material
This part is printed with polylactic acid (PLA) or other sturdy plastic, such as Polycarbonate (PC) or Acrylonitrile styrene acrylate (ASA).
Printing This Part
Slicing
Orientation
| Part | Notes | Example |
|---|---|---|
| Thumbscrew | We recommend printing the thumbscrew with the narrower end of the hole touching the buildplate. | 
|
Settings
Thumbscrew
We start with the default "Standard Quality" 0.2 mm print profile. We recommend the following settings overrides:
| Setting | Recommendation | Notes |
|---|---|---|
| Shell - Wall Line Count | 4 | This was increased from the default to increase the durability when higher amounts of stress are applied. |
| Shell - Bottom Layers | 4 | This will provide sturdy walls for each prong. |
| Shell - Top Layers | 4 | This will provide sturdy walls for each prong. |
| Infill - Density | 45 | This will provide enough stability for a small thumbscrew under repeated use. |
| Infill - Pattern | Tri-Hexagon
Cubic Subdivision |
These infill patterns provide good internal support in multiple directions. Tri-Hexagon uses less filament but is also less durable. |
| Speed - Print Speed | 40mm/s | For final production prints, we recommend printing slower than average to decrease stringing with small holes. |
| Support - Generate Support | No | This part has no overhangs. |
| Build Plate Adhesion - Adhesion Type | Raft | This part is small and it is recommended to use a raft. |
Results
Printers
This part has been print tested with the following 3D printers:
| Manufacturer | Model | Notes |
|---|---|---|
| Creality | CR-10 Mini | Excellent print quality. Reliable machine. |
| Creality | CR-10 | Excellent print quality. Reliable machine. |
| Creality | Ender 3 S-1 Pro |
Build Surface
This part has been print tested with the following build surfaces:
| Method | Notes |
|---|---|
| Painter's tape | |
| Glue stick | Creates an uneven and non-uniform first print layer appearance. |
| Adhesive build surface | First layer may have problems printing full height depending on type and hardness of build surface, but this does not affect the overall printability. |
| Polyetherimide (PEI) build plate | Some parts may require a raft if there are issues with the first layer adhering. |
Filament
This part has been print tested with the following materials:
| Filament | Manufacturer | Notes |
|---|---|---|
| Overture PLA | Overture | Excellent build quality and durability. Good for prototyping or production kiosks. |
| Amazon Basics PLA | Amazon | Decent build quality and durability. Recommended for rapid prototyping. |
| Documentation | |
|---|---|
| Installation | Look and Feel |
| Interaction Modes | Developing Activity Types |
| Creating an Interactive | Framework |
| Integrating CLIO | Contribute |
