POP Kiosk Bumper (part)

This section contains CLIO documentation.

Overview

• 
• 

Similar to the collar, the bumper also protects the exposed edges of display, but it is printed as one part with a soft and flexible TPU filament.  When printed with specific infill settings, it can provide additional cushioning protection to bumps and falls.  This bumper is used instead of the collar and was created for use in mobile pop-up exhibits.

Features

• Provides additional protection to the touchscreen display
• Rounded and tapered corners designed to reduce accidental snags
• Compatible with the POP kiosk cover for storage and transport
• Add color and contrast to your kiosk with swappable collars
• Can be removed without tools, unlike the collar.
• Can be used with a self-adhesive screen protector

Download

The most up-to-date version of this part can be downloaded from our Thingiverse page.

Resource: POP Bumper – Thingiverse

Specifications

Dimensions

This kiosk bumper is 209.99mm x 125.49mm x 15.00mm.

Printed Parts

Part	Description	Quantity	Estimates
			Print Time	Filament Usage
Bumper	The soft protective touchscreen bumper	1	22 hours 12 minute	49g

Hardware

This part requires no additional hardware.

Material

This part is printed with thermoplastic polyurethane (TPU), thermoplastic elastomer (TPE) or other flexible plastic with a shore hardness rating between 80A and 100A.

Printing This Part

Slicing

Orientation

Part	Notes	Example
Bumper	We recommend printing the bumper with the front facing up. This will provide the best plate adhesion.

Settings

Bumper

We start with the default "Standard Quality" 0.2 mm print profile. We recommend the following settings overrides:

Setting	Recommendation	Notes
Shell - Wall Line Count	2	This was decreased from the default so that the material is more flexible in its printed form.   This improves the parts compression characteristics.
Shell - Bottom Layers	3	This provides a good mixture of flexibility and sturdiness.
Shell - Top Layers	3	This provides a good mixture of flexibility and sturdiness.
Infill - Density	15%	This part is meant to be largely hollow so that it can use air to cushion the display in the event of a drop. This infill density provides a sturdy feel to the part, but allows it to be compressed.
Infill - Pattern	Gyroid Tri-Hexagon	Gyroid provides good compression characteristics in all directions because the infill rotates throughout each layer. Tri-Hexagon is a good alternative when a sturdier print is desired.
Material – Flow	100% - 110%	Flow generally needs to be assessed on a filament by filament basis, but many flexible filaments may benefit from a slightly higher flow rate.
Speed - Print Speed	20mm/s	Soft filaments like TPU and TPE can be very sensitive to printer speed and it is always recommended to print these parts much slower.
Travel - Enable Retractions	False	Disabling retractions can help improve print quality and decrease the rates of printer jams with flexible filaments.
Support - Generate Support	Yes	This part has a lot of overhangs that require the use of supports.
Support - Support Structure	Tree	We highly recommend tree supports instead of normal supports. They take more time, but they require less filament and are much easier to remove from inside the collar.
Support - Support Placement	Touching Buildplate	Only printing supports that touch the build plate are much easier to remove from this print.
Support – Overhang Angle	85%	This is force the printer to only print supports for the inside flaps, and not the exterior curved edges.
Build Plate Adhesion - Adhesion Type	Skirt	This part has a lot of contact with the print bed and should not require a raft.

Results

Printers

This part has been print tested with the following 3D printers:

Manufacturer	Model	Notes
Creality	CR-10 Mini	Decent print quality. The Bowden extruder on the CR-10 series struggles with most flexible filaments, but it is possible.
Creality	CR-10	Decent print quality. The Bowden extruder on the CR-10 series struggles with most flexible filaments, but it is possible.
Creality	Ender 3 S-1 Pro	Excellent print quality. The all-metal direct drive extruder printed TPU and TPE like they were standard rigid filaments.

Build Surface

This part has been print tested with the following build surfaces:

Method	Notes
Painter's tape
Glue stick	Creates an uneven and non-uniform first print layer appearance.
Adhesive build surface	First layer may have problems printing full height depending on type and hardness of build surface, but this does not affect the overall printability.
Polyetherimide (PEI) build plate	This part may require a raft if there are issues with the first layer staying adhered.

Filament

This part has been print tested with the following materials:

Filament	Manufacturer	Notes
Priline TPU	Priline	Excellent print quality when used with a direct drive printer like the Creality S-1 Pro.
Ninjatek NinjaFlex TPU	Ninjatek	Excellent print quality when used with a direct drive printer like the Creality S-1 Pro.

Documentation
Installation	Look and Feel
Interaction Modes	Developing Activity Types
Creating an Interactive	Framework
Integrating CLIO	Contribute