Difference between revisions of "POP Bill of Materials"
| Line 2: | Line 2: | ||
== Overview == | == Overview == | ||
The cost per kiosk, including electronics, hardware, and filament is $220. The kiosk leverages designs that are available through online repositories under permissive licenses, as well as custom parts created specifically for this project. | |||
== Hardware == | == Hardware == | ||
| Line 18: | Line 18: | ||
=== Computer === | === Computer === | ||
{ | For an individual POP Kiosk, you only need to buy one of the computers below. The Model 4B is the latest generation Raspberry Pi microcomputer and is recommended for most applications requiring video or 3D rendering. The Model 3B+ is the previous generation Raspberry Pi microcomputer and will work in some applications. | ||
{| class="wikitable" | |||
!Manufacturer | |||
!Part | |||
!Description | |||
!Avg MSRP Unit Cost | |||
!Qty. | |||
!Avg Total Cost | |||
|- | |||
|Raspberry Pi | |||
|[https://www.raspberrypi.com/products/raspberry-pi-4-model-b/ Model 4B (1GB)] | |||
|This is the primary computer system that will power the POP kiosk. | |||
|$35.00 | |||
|1 | |||
|$35.00 | |||
|- | |||
|Raspberry Pi | |||
|[https://www.raspberrypi.com/products/raspberry-pi-3-model-b-plus/ Model 3B+ (1GB)] | |||
|This is the primary computer system that will power the POP kiosk. | |||
|$35.00 | |||
|1 | |||
|$35.00 | |||
|} | |||
=== Touchscreen Display === | === Touchscreen Display === | ||
{ | This part will act as both the display for the kiosk, as well as the only input device. The Raspberry Pi Official 7" touchscreen is the only display compatible with the POP kiosk case. | ||
{| class="wikitable" | |||
!Manufacturer | |||
!Part | |||
!Description | |||
!Avg MSRP Unit Cost | |||
!Qty. | |||
!Total Cost | |||
|- | |||
|Raspberry Pi | |||
|[https://www.raspberrypi.com/products/raspberry-pi-touch-display/ Official 7" Touchscreen] | |||
|This is the primary touchscreen display used for the POP 7" kiosk. | |||
|$75.00 | |||
|1 | |||
|$75.00 | |||
|} | |||
== Machines == | == Machines == | ||
=== 3D Printer === | === 3D Printer === | ||
{ | Any Fusion Deposition Modeling (FDM) 3D printer can be used to manufacture the POP kiosk parts, but we recommend these two printers for makers looking to explore 3D printing for the first time. The CR-10 offers a great experience for beginners, while also allowing customization through custom firmware and printer upgrades. The Ender 3 S1 | ||
{| class="wikitable" | |||
!Manufacturer | |||
!Part | |||
!Description | |||
!Avg MSRP Unit Cost | |||
!Qty. | |||
!Total Cost | |||
|- | |||
|Creality | |||
|[https://www.creality3dofficial.com/products/creality-cr-10-3d-printer CR-10 3D Printer] | |||
|This is a low-cost beginner 3D printer to can be used to learn the basics and expanded to print with advanced materials, such as ASA or PP. | |||
|$309.00 | |||
|1 | |||
|$309.00 | |||
|- | |||
|Creality | |||
|[https://www.creality.com/products/creality-ender-3-s1-pro-fdm-3d-printer Ender-3 S1 Pro] | |||
|This is an entry level 3D printer that can be used to print flexible and more advanced materials out-of-the-box with less extra setup. | |||
|$479.00 | |||
|1 | |||
|$479.00 | |||
|} | |||
== Consumables == | == Consumables == | ||
Revision as of 12:56, 6 March 2023
Overview
The cost per kiosk, including electronics, hardware, and filament is $220. The kiosk leverages designs that are available through online repositories under permissive licenses, as well as custom parts created specifically for this project.
Hardware
Fasteners
Standoffs
Cables and Mounts
Electronics
Computer
For an individual POP Kiosk, you only need to buy one of the computers below. The Model 4B is the latest generation Raspberry Pi microcomputer and is recommended for most applications requiring video or 3D rendering. The Model 3B+ is the previous generation Raspberry Pi microcomputer and will work in some applications.
| Manufacturer | Part | Description | Avg MSRP Unit Cost | Qty. | Avg Total Cost |
|---|---|---|---|---|---|
| Raspberry Pi | Model 4B (1GB) | This is the primary computer system that will power the POP kiosk. | $35.00 | 1 | $35.00 |
| Raspberry Pi | Model 3B+ (1GB) | This is the primary computer system that will power the POP kiosk. | $35.00 | 1 | $35.00 |
Touchscreen Display
This part will act as both the display for the kiosk, as well as the only input device. The Raspberry Pi Official 7" touchscreen is the only display compatible with the POP kiosk case.
| Manufacturer | Part | Description | Avg MSRP Unit Cost | Qty. | Total Cost |
|---|---|---|---|---|---|
| Raspberry Pi | Official 7" Touchscreen | This is the primary touchscreen display used for the POP 7" kiosk. | $75.00 | 1 | $75.00 |
Machines
3D Printer
Any Fusion Deposition Modeling (FDM) 3D printer can be used to manufacture the POP kiosk parts, but we recommend these two printers for makers looking to explore 3D printing for the first time. The CR-10 offers a great experience for beginners, while also allowing customization through custom firmware and printer upgrades. The Ender 3 S1
| Manufacturer | Part | Description | Avg MSRP Unit Cost | Qty. | Total Cost |
|---|---|---|---|---|---|
| Creality | CR-10 3D Printer | This is a low-cost beginner 3D printer to can be used to learn the basics and expanded to print with advanced materials, such as ASA or PP. | $309.00 | 1 | $309.00 |
| Creality | Ender-3 S1 Pro | This is an entry level 3D printer that can be used to print flexible and more advanced materials out-of-the-box with less extra setup. | $479.00 | 1 | $479.00 |
Consumables
Filament
| Documentation | |
|---|---|
| Installation | Look and Feel |
| Interaction Modes | Developing Activity Types |
| Creating an Interactive | Framework |
| Integrating CLIO | Contribute |
