Difference between revisions of "BurkeMobile Pilot Testing"
From CLIO
CLIO>Clio |
m (1 revision imported) |
(No difference)
|
Revision as of 21:54, 15 November 2021
Kiosk
The kiosk prototype used during CLIO pilot testing was constructed using off-the-shelf open-source hardware. It is powered by the Raspberry Pi 3B+ computer and official Raspberry Pi 7" touchscreen. The case was fabricated using consumer 3D printer. Our prototype kiosk uses a Linux-distribution known as DietPi and open-source software. The total per-unit build cost per kiosk is $125.