POP Bill of Materials

From CLIO
Google material book.png

Overview

The cost per kiosk, including electronics, hardware, and filament is $220.  The kiosk leverages designs that are available through online repositories under permissive licenses, as well as custom parts created specifically for this project.

Hardware

Fasteners

Imbox style.png

Standoffs

Imbox style.png

Cables and Mounts

Imbox style.png

Electronics

Computer

For an individual POP Kiosk, you only need to buy one of the computers below. The Model 4B is the latest generation Raspberry Pi microcomputer and is recommended for most applications requiring video or 3D rendering. The Model 3B+ is the previous generation Raspberry Pi microcomputer and will work in some applications.

Manufacturer Part Description Avg MSRP Unit Cost Qty. Avg Total Cost
Raspberry Pi Model 4B (1GB) This is the primary computer system that will power the POP kiosk. $35.00 1 $35.00
Raspberry Pi Model 3B+ (1GB) This is the primary computer system that will power the POP kiosk. $35.00 1 $35.00

Touchscreen Display

This part will act as both the display for the kiosk, as well as the only input device. The Raspberry Pi Official 7" touchscreen is the only display compatible with the POP kiosk case.

Manufacturer Part Description Avg MSRP Unit Cost Qty. Total Cost
Raspberry Pi Official 7" Touchscreen This is the primary touchscreen display used for the POP 7" kiosk. $75.00 1 $75.00

Machines

3D Printer

Any Fusion Deposition Modeling (FDM) 3D printer can be used to manufacture the POP kiosk parts, but we recommend these two printers for makers looking to explore 3D printing for the first time. The CR-10 offers a great experience for beginners, while also allowing customization through custom firmware and printer upgrades. The Ender 3 S1 Pro offers slightly less customizability, but it works out-of-the-box with many more advanced filaments.

Manufacturer Part Description Avg MSRP Unit Cost Qty. Total Cost
Creality CR-10 3D Printer This is a low-cost beginner 3D printer to can be used to learn the basics and expanded to print with advanced materials, such as ASA, PC or PP. $309.00 1 $309.00
Creality Ender-3 S1 Pro This is an entry level 3D printer that can be used to print flexible and more advanced materials out-of-the-box with less extra setup. $479.00 1 $479.00

Consumables

Filament

There is an expansive range of filament materials and colors that can be used to print the POP kiosk case. Many filaments are based on plastics or plastic composites, each of which have their material characteristics and environmental concerns.

For prototyping and non-production uses, we recommend using PLA (polylactic acid) because it is low-cost while still offering high print speed and quality. For final production prints, we use PETG for gallery kiosks. We chose PC or PP for cases that are subject to bumps and abrasion through travel and storage. TPU or TPE are used for parts that require flexibility.

Manufacturer Part Material Description Avg MSRP Unit Cost Qty. Total Cost
Amazon Basics PLA PLA (Polylactic Acid) This is a reasonably-priced, moderate-quality filament that can be used to rapidly prototype and trial kiosk parts. This material is brittle with low impact resistance.


PLA is not commercially recyclable and only biodegradable under specific conditions.

$22.00 1 $22.00
Overture Eco PLA PLA (Polylactic Acid) This is a reasonably-priced, moderate-quality filament that can be used to rapidly prototype and trial kiosk parts. This material is brittle with low impact resistance. This filament is partially created with manufacturer PLA scraps to decrease waste.


PLA is not commercially recyclable and only biodegradable under specific conditions.

$18.00 1 $18.00
Overture PLA Professional PLA (Polylactic Acid) This is a reasonably-priced, high-quality filament that can be used to print kiosk parts for interactive kiosk evaluations. It has decent durability characteristics, but is still not recommended for production use.


PLA is not commercially recyclable and only biodegradable under specific conditions.

$25.00 1 $25.00
Overture PETG PETG (Polyethylene terephthalate glycol) This is a reasonably-priced, high-quality filament that can be used to print kiosk parts for use in a low-traffic gallery. PETG offers good impact resistance, but has poor abrasion resistance and it is not recommended for travelling applications.


PETG is slightly more difficult to print than PLA. It is not recyclable or biodegradable.

$19.99 1 $19.99
Terrafillum PLA/PP Blend Composite PLA (Polylactic Acid) and PP (Polypropylene) This is an expensive and high-quality filament that can be used to print final production kiosk parts for high-traffic applications. The PP in this blend allows for more flexibility and durability than traditionally brittle PLA.


This is an advanced material that requires extensive hands-on experience with 3D printing. This material is neither recyclable nor degradable, but its creation generally has a lower environmental impact than most other materials.

$57.00 1 $57.00
Polymaker PolyMax PC PC (Polycarbonate) This is an expensive and high-quality filament that can be used to print final production kiosk parts for high-traffic applications. Polycarbonate can slightly flex without warping or discoloring. It is impact and temperature resistant.


This is an advanced material that requires extensive hands-on experience with 3D printing. This material is not degradable, but it is infinitely recyclable without loss to mechanical properties.

$48.30 1 $48.30
NinjaTek Chinchilla TPE (Thermoplastic Elastomer) This is an expensive and high-quality filament that can be used to print the final production bumper for high-traffic applications. It is soft to the touch and slightly flexible. This material is chemical-resistant, oil-resistant and tested to be skin-safe.


This is an advanced material that requires extensive hands-on experience with 3D printing. This material may require a "direct drive" 3D printer, like the Ender-3 S1 Pro.

$100.94 1 $100.94
NinjaTek NinjaFlex TPU (Thermoplastic Polyurethane) $87.50 1 $87.50
Overture TPU TPU (Thermoplastic Polyurethane) This material can be printed with a "bowden" 3D printer, like the CR-10. $27.99 1 $27.99
Documentation
Installation Look and Feel
Interaction Modes Developing Activity Types
Creating an Interactive Framework
Integrating CLIO Contribute