BurkeMobile Pilot Testing

From CLIO

Revision as of 11:37, 22 May 2020 by CLIO>Clio
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Imbox style.png
This section could use more detail. You can help by expanding it.

Kiosk

Label important.png
Main Article: BurkeMobile (kiosk)

The kiosk prototype used during CLIO pilot testing was constructed using off-the-shelf open-source hardware. It is powered by the Raspberry Pi 3B+ computer and official Raspberry Pi 7" touchscreen. The case was fabricated using consumer 3D printer. Our prototype kiosk uses a Linux-distribution known as DietPi and open-source software. The total per-unit build cost per kiosk is $125.

Imbox style.png
This section could use more detail. You can help by expanding it.

Activities

Imbox style.png
This section could use more detail. You can help by expanding it.

Evaluation

Label important.png
Main Article: CLIO Evaluation
Imbox style.png
This section could use more detail. You can help by expanding it.

Volunteers

Imbox style.png
This section could use more detail. You can help by expanding it.

Education Staff

Imbox style.png
This section could use more detail. You can help by expanding it.
Retrieved from "https://wiki.interpretive.tech/index.php?title=BurkeMobile_Pilot_Testing&oldid=352"