POP Kiosk Cover (part)

From CLIO
Google material book.png

Overview

The cover provides protection to the front of the kiosk display by attaching directly to the collar or bumper.  This cover was created to provide protection to the glass screen during transport and storage.

Features

  • Provides protection to the touchscreen display during transport
  • Rounded and tapered corners designed to reduce accidental snags
  • Optional foam pad adds extra impact protection

Download

The most up-to-date version of this part can be downloaded from our Thingiverse page.

Specifications

Dimensions

This kiosk bumper is 213.45mm x 127.56mm x 13.00mm.

Printed Parts

Part Description Quantity Estimates
Print Time Filament Usage
Cover A protective touchscreen cover 1 6 hours 26 minutes 42g

Hardware

This part requires no additional hardware.

Material

This part is printed with polylactic acid (PLA) or other sturdy plastic, such as Polycarbonate (PC) or Acrylonitrile styrene acrylate (ASA).

Printing This Part

Slicing

Orientation

Part Notes Example
Cover We recommend printing the cover with the front in contact with the build plate.

Settings

Cover

We start with the default "Standard Quality" 0.2 mm print profile. We recommend the following settings overrides:

Setting Recommendation Notes
Shell - Wall Line Count 3 This will print all of the walls as solid.
Shell - Bottom Layers 5 This will print the entire protective front as a solid piece of plastic without infill.
Infill - Density 10% This part does not apply much as the cover is thin and does not need infill.
Infill - Pattern Tri-Hexagon These infill patterns provide good internal support in multiple directions.  Tri-Hexagon uses less filament but is also less durable.
Speed - Print Speed 40mm/s For final production prints, we recommend printing slower than average to improve print quality with the thin walls.
Support - Generate Support No This part has no overhangs.
Build Plate Adhesion - Adhesion Type None This part has a lot of contact with the print bed and should not require a raft.

Results

Printers

This part has been print tested with the following 3D printers:

Manufacturer Model Notes
Creality CR-10 Mini Excellent print quality. Reliable machine.
Creality CR-10 Excellent print quality. Reliable machine.
Creality Ender 3 S-1 Pro Excellent print quality. Reliable machine.

Build Surface

This part has been print tested with the following build surfaces:

Method Notes
Painter's tape
Glue stick Creates an uneven and non-uniform first print layer appearance.
Adhesive build surface First layer may have problems printing full height depending on type and hardness of build surface, but this does not affect the overall printability.
Polyetherimide (PEI) build plate There were no issues with print plate adhesion.

Filament

This part has been print tested with the following materials:

Filament Manufacturer Notes
Overture PLA Overture Excellent build quality and durability. Good for prototyping or production kiosks.
Amazon Basics PLA Amazon Decent build quality and durability. Recommended for rapid prototyping.
Documentation
Installation Look and Feel
Interaction Modes Developing Activity Types
Creating an Interactive Framework
Integrating CLIO Contribute